Digital display type catenary straightness measuring instrument
Contact Info
- Add:, Zip:
- Contact: 王先生
- Tel:18910132037
- Email:1322188373@qq.com
Other Products
Model FTJP-3 Digital Display Catenary Straightness Measuring Instrument
The digital display catenary straightness measuring instrument can measure the straightness of the conductor, and can perform automatic measurement without manual reading.
Display data unit: mm
Current status: current operating status of the equipment
A: Real-time horizontal position of catenary
B: Real-time displacement of catenary
C: Displacement variation of catenary
Technical Parameters
1) Measuring range: 1000mm
2) Measuring accuracy: Grade 0
3) Scope of application: Suitable for various catenary wires
Measuring Procedure
1. Place the catenary into the equipment slot.
2. Turn on the power switch of the equipment.
3. After the system starts, the current status will be "Initializing".
4. Wait for the initialization to complete and the prompt "Ready" will appear, then you can perform the measurement operation.
5. Press and hold the button for 3 seconds, the current status will change to "Start Measurement", at this time enter the measurement mode and you can measure the catenary.
6. After the measurement is completed, press and hold the button for 3 seconds, the current status will change to "Measurement Ended".
Calibration Procedure
1. Place the equipment on a horizontal plane.
2. Place a measuring block with a thickness of 1cm at the measuring position of the equipment.
3. Turn on the equipment.
4. Press and hold the button for 4 seconds in the initialization state, and the prompt "Calibration Completed" will appear.
| Industry Category | Instruments & Meters/Measuring Instruments/Other Measuring Instruments |
|---|---|
| Product Category | |
| Brand: | |
| Spec: | FTJP-3 |
| Stock: | 10 |
| Manufacturer: | 北京飞拓信达激光技术有限公司 |
| Origin: | 111107 |
